Parker Spool Type Logic Element (R06E3100V)
Part Number
R06E3-10.0V
Parker’s spool type logic element valve family features a versatile range of screw-in elements that can provide flexible design solutions for many common cartridge valve applications with flows up to 500 lpm (132 gpm) and pressures up to 420 bar (6000 psi). Parker logic elements are small pilot controlled devices that offer system designers the advantage of using these valves in applications where the flow and pressure conditions may exceed the limits of typical cartridge valves. They can be used to control flow, pressure, or direction, and when applied in the proper arrangements, can perform multi-task control functions and will help reduce the size, cost, and complexity of integrated manifold systems.
Markets:
• Aerial
• Construction Equipment
• Material Handling Equipment
• Miscellaneous Industrial
• Miscellaneous Mobile
Features/Benefits:
• Low leakage design
• High flow capacity
• Hardened, precision ground parts for durability
• All external parts zinc plated
Applications:
• Fixed pump unloading
• High flow pressure compensation
• Load-sense unloading
• Priority steering/braking
• Winch control
Additional Technical Insight:
Logic elements are commonly used in conjunction with smaller, low flow solenoid or pilot valves in order to provide pilot pressure to the logic element for higher flow applications.
Markets:
• Aerial
• Construction Equipment
• Material Handling Equipment
• Miscellaneous Industrial
• Miscellaneous Mobile
Features/Benefits:
• Low leakage design
• High flow capacity
• Hardened, precision ground parts for durability
• All external parts zinc plated
Applications:
• Fixed pump unloading
• High flow pressure compensation
• Load-sense unloading
• Priority steering/braking
• Winch control
Additional Technical Insight:
Logic elements are commonly used in conjunction with smaller, low flow solenoid or pilot valves in order to provide pilot pressure to the logic element for higher flow applications.
Configuration | Normally Closed, Normally Closed |
---|---|
Flow Direction | Nose to Side (1-2), Nose to Side (1-2) |
Maximum Flow Rate | 106 GAL/MIN, 400 L/MIN, 400 L/min, 106 Gal/min |
Seal Material | Fluorocarbon, Fluorocarbon |
Switching Pressure | 145 PSI, 10 BAR, 10 bar, 145 psi |
Dampening Orifice Included | No, No |
Function | Logic Valve |
Maximum Inlet Pressure Rating | 420 bar, 6000 psi |
Installation Torque | 100 Nm, 74 lb-ft |
Pilot Location | External |
Filter Efficiency Rating | ISO 4406 18/16/13, SAE Class 4 |
Maximum Operating Pressure | 6000 psi, 420 bar |
Maximum Operating Temperature | +400 °F, +204 °C |
Minimum Operating Temperature | -15 °F, -26 °C |
Vented | Internal |
Body Material | N/A |
Maximum Kinematic Viscosity | 45-2000 SSU (6 to 420 cSt) |
Operating Temperature | -15 to +400 °F, -26 to +204 °C |
Cavity Size | C16-3S |
Operation Type | Pilot Operated |
Weight | 0.38 kg, 0.84 lb |
Division | Mobile Systems Division Europe |
For Fluid Type | Mineral-based or synthetic hydraulic fluids |
Actuation Type | Pilot to Close |
Flow Rate | 270 @ 100 PSI (7 BAR) Nominal L/min, 71 @ 100 PSI (7 BAR) Nominal Gal/min |
Leak Rate | 90 @ 1450 PSI (BAR) cm3/min |
Valve Material | All parts steel. All operating parts hardened steel |