The KTV(E) pumps offer an automatic option to the KTV series, without the need for external control panels and cumbersome float switches. The sensor probe is mounted in a durable, moulded rubber bracket and, for added protection, is positioned within the footprint of the pump base. Once the water level reaches the probe, the pump will start and continue to operate for one minute after the water falls below it. However, if the water touches the probe within this time, the “stop” signal is cancelled and the pump continues to run until the water is cleared. All models are supplied with 20 metres of heavy duty, H07RN-F rubber power cable, except the KTVE2.75 which is supplied with 10 metres.
400 volt 3 phase 320 - 980 l/min 6 - 8.5mm particle Heavy Site Drainage Hire Fleets Quarries Construction 50mm - 2" BSPM outlet 80mm - 3" BSPM outlet 0.75 - 5.5kW Automatic