The Diesel BP2000 is a low voltage, D.C., rotary-vane, self-priming pump with a bypass valve and cast iron pump body and is for diesel transfer only. It has a steel shaft, which is fitted with a lip seal. The TESV, IP55 motor, which has a duty cycle of 30 minutes, is fitted with crocodile clips, a line fuse and an on/off switch. A useful carrying handle is fi tted and it is mounted on a base plate. Maximum suction lift, with a foot valve, is 5m, however without one,
3m, or less, is recommended.

The Bipump is a rotary vane self-priming pump that can be operated on either 12 or 24 volts D.C. and has a large fl ow rate. It is fi tted with a bypass valve, has a cast iron pump body, a steel shaft, which is fitted with a lip seal, and has a TESV IP55 motor fi tted with crocodile clips and a line fuse. It has a duty cycle of 30 minutes. A useful carrying handle is fi tted and it is mounted on a base plate. Maximum suction lift, with a foot valve, is 5m, however without one, 3m, or less, is recommended.

The Panthers are self-priming rotary vane pumps with cast iron pump bodies for diesel transfer only. They are fitted with internal, 100 micron filters, which are easily accessible for cleaning. In addition, they have internal by-pass valves, which protect the pump (for up to 2 minutes) from pressure caused by a closed nozzle. They have steel shafts, which are fitted with mechanical seals and have TEFV IP55 motors fi tted with on/off switches and power leads are supplied.