No of Items
 0
Total Value
£0.00
Excluding VAT & Carriage

 

 

 
Tangye Jacks TANGYE HYDRALITE JACKS
 


Tangye Hydralite Jacks

A range of lightweight jacks designed to lift, lower, manoeuvre and position heavy loads with maximum safety.

Portable
Extensive user of high strength aluminium alloys has minimised jack weight for improved portability.


Reliable
All moving parts are totally enclosed and lubricated by the hydraulic oil. Seats are highly resistant to deterioration under widely varying climatic conditions. Their long working life make Hydralite jacks the choice of many rental operations.


Safe - Overload Protection
A high pressure relief valve prevents lifting of loads in excess of the jack's capacity while locking overloads applied to the ram

Overstroke Protection
Hydralite jacks are fitted with a fail-safe positive stop mechanism which prevents overstroking of the ram by venting oil to the reservoir when the stroke limit is reached.

Load Sustaining
Jack models incorporating a threaded ram and load retaining ring, model - SR, should be selected when loads are to be sustained for a significant time. No need to rely on hydraulic fluid pressure.

Quality Assurance
Every jack is serial numbered, fully tested and certified.


  

Minimum Operator Effort
Full capacity is within the capability of one man. The short lever is lightweight and requires little space for operation.

Easy and Versatile Operation
Operator control is provided by the hexagon key in the operating lever which smoothly controls the release valve. On most jacks the operating lever can be fitted in any one of the three positions in the quadrant to obtain the most suitable operating height. The jacks can be used vertically (on the base) or horizontally (on front face) due to the carefully positioned breather.


Low Clearance
Claw models of most jacks are available for lifting loads with low ground clearance. All jacks used with a claw must be fitted with the extended base option. The load applied to the claw must not exceed the maximum load stated in the specification tables and marked on the claw. A claw should not be used on screwed ram jacks.


Wide Range
Capacities from 20 tonne to 100 tonne with stroke options and claw and screwed nail ram features.


Easy to Maintain
The design of the jack makes inspection and component replacement uncomplicated. Main ram seal is changed by simply withdrawing the ram from the top of the jack. Refer to service instructions.


Ready to Use
Hydralite jacks are immediately ready to use. No searching for suitable hand pumps with correct oil capacity, changing fittings, replacing damaged hoses or fabricating load support plates as may be necessary when using pumps and cylinders.