TSURUMI OM2 AUTOMATIC WATER PUMPS
230 volt.

The Tsurumi OM2 pump is a strong and efficient pump in 304 stainless steel and engineering plastics. Excellent flow and head are produced from a small 150-watt motor, which makes it ideal for many domestic and industrial jobs, particularly cellar, aquatic and processing duties. Furthermore, Water Authorities users find the close, compact positioning of the optional integral tube float switch (OMA2) is particularly suited to applications where a sump is narrow or where a traditional pendant type float’s operation could be fouled. Long term, trouble free operation is enhanced further with an integral vent valve to prevent air locking. The 403 stainless steel shaft is fitted with an ultra hardwearing, silicon carbide, double mechanical seal, (in an oil chamber), and a semi-vortex impeller that will give suspended soft solids handling. Supplied with 10 metres of heavy duty, H07RN-F rubber power cable.

FEATURES

With a light fibre-reinforced plastic (FRP) casing and head cover, the pump is abrasion and corrosion resistant, minimizing maintenance.

The torque-flow impeller eliminates blocking and binding.
Made of FRP, it withstands long operation with minimal abrasive wear.

• Discharge Bore: 32mm
• Model: OM(A)
• Motor Output kW: 0.15
• Phase: single
• Head max m: 7.5
• Capacity max l/min: 195
• Impeller passage mm: 10
• Cable Length m: 10

DOWNLOAD OM2 RANGE PDF DOCUMENT

TSURUMI HSA AUTOMATIC AND MANUAL WATER PUMPS
110 volt or 230 volt versions

The Tsurumi HS series comprises a 50mm (2") pump. The pumps have a solid cast aluminium body, cast iron pump casing and an impact-resistant PVC strainer base for durability during robust handling. The urethane vortex impeller offers excellent wear resistance in site applications where water contains sand and silt in suspension, thus maintaining performance and reliability. The HS3.75S features an oil lifter to maintain seal lubrication during operation in any position. Both models have a 403 stainless steel shaft, that is fitted with an ultra hardwearing, silicon carbide, double mechanical seal (in an oil chamber), and have a stirring device to reduce blockages. Used predominantly as contractor pumps on site drainage duties, they can also be used in other industrial applications. Supplied with 10 metres of heavy duty, H07RN-F rubber power cable.

FEATURES

• Semi-vortex urethane Rubber impeller with agitator suspends solids and allows for pumping of sand and stringy material.
• Highly efficient, continuous duty air filled, copper wound motor with class B, insulation minimizes the cost of operation.
• Built in thermal protection prevents motor failure due to overloading, accidental run-dry and single phasing in three phase units.
• Double inside mechanical seals with silicon carbide faces (both top and bottom) running in an oil filled chamber provide for one the most durable seal designs available.
• Double shielded, permanently lubricated, high temperature C3 ball bearings rated for a B-10 life or 60,000 hours provide for extend operational life.

DOWNLOAD HS RANGE PDF DOCUMENT